Semsons Tech

Gold Analyzer XRF Signet FSDD

Signet FSDD · 72 elements · ±0.10% on gold

Special offer price

₹12,99,000

MRP ₹15,00,000 · 13% off · You save ₹2,01,000

Inclusive of GST

Booking amount

Inclusive of GST. Counts toward the full price; the balance of ₹12,49,000 is due on installation.

₹50,000

Free delivery · Dispatch in about 45 days

A Semsons Tech benchtop XRF analyzer that measures gold purity and the full make-up of the alloy without marking the piece. It runs from your own PC or laptop.

  • Shows the gold purity and karat in 10 to 60 seconds
  • Lists every metal in the alloy, up to 72 elements
  • Tests bars, coins, jewellery, powder and liquid
  • Nothing is cut, filed or touched with acid

✔ Up to 72 elements - gold, silver, platinum group, copper, zinc and more
✔ ±0.10% on gold - across a 1% to 99.99% analysis range
✔ Si-PIN detector - 145 ± 15 eV resolution
✔ 10 to 60 seconds - 40 seconds for the best reading
✔ Solid, powder or liquid - all three can be tested
✔ Non-destructive - no acid, no scratching, no filing

Talk to our team about booking this machine, the final quotation, a demo or installation.

View the full guideShow less
Signet FSDD XRF gold analyzer guide: parts of the machine, how XRF reads gold, four steps to test a sample, what it can test and who uses it

Semsons Tech Signet FSDD - XRF Gold Analyzer for Purity and 72-Element Testing

Gold purity to ±0.10% and up to 72 elements in one test, with nothing taken off the piece.

The Signet FSDD is a benchtop XRF gold analyzer. You place the sample in the chamber, start the test from your computer, and between 10 and 60 seconds later the screen shows the gold percentage, the karat and every element found in the alloy. It reads gold from 1% to 99.99% and takes solid pieces, powder and liquid. It is built for work where the figure goes on paper afterwards: a hallmarking check, a refinery lot, a bullion purchase or an export order.

How It Works

A tungsten-target X-ray tube sends a beam at a 1 to 2 mm spot on the sample. Each element in that spot sends back X-rays at its own energy. The Si-PIN detector sorts those energies, and the software counts them to give the percentage of each element. The karat follows from the gold figure. The FSDD's detector separates energies to 145 ± 15 eV, so elements whose signals sit close together are counted apart.

How to Use It

  1. Place the sample in the chamber and close it. The HD camera shows the test spot on your screen, so you aim at the metal and not at a stone.
  2. Start the test from the software and choose the time: 10 seconds for a quick check, 40 seconds for the best reading, up to 60.
  3. Read the result - gold percentage, karat and the element list. Print it or save it against the job.

Powder and liquid go in a sample cup. No acid, no chemicals and no sample preparation.

What the Result Tells You

What you need to knowWhat the FSDD reports
The karat of a pieceGold percentage to ±0.10%, and the karat from it
What the gold is alloyed withSilver, copper, zinc, nickel, cobalt, iron and the other metals present, each as a percentage
Platinum-group metalsPlatinum, palladium, rhodium, iridium, ruthenium and osmium are on the element list
Unwanted elements in goldIridium, ruthenium, osmium, cadmium and lead are reported when present in the tested spot
Whether a refined lot is on targetThe gold figure and the impurity breakdown before dispatch

XRF measures the metal the beam reaches, which is the surface layer of the tested spot. A plated item or a bar with a different core can read as its outer metal, so a piece whose weight or origin does not match its reading should be checked further before you buy.

What You Can Test

Gold bars, biscuits and coins. Rings, chains, bangles, earrings and pendants, including pieces with stones set in them. Old and scrap gold. Silver, platinum and palladium. Refinery samples, filings and powder, and liquid samples in a sample cup. The chamber takes items up to 368 × 298 × 86 mm.

Key Specifications

SpecificationDetails
ModelSignet FSDD
TechnologyX-ray fluorescence (XRF), non-destructive
DetectorSilicon PIN (Si-PIN)
Detector resolution145 ± 15 eV
Accuracy±0.10% on gold content
Analysis range1% to 99.99%
ElementsUp to 72, including gold, silver, platinum, palladium, iridium, rhodium, ruthenium, osmium, rhenium, copper, nickel, zinc, cobalt, iron, manganese, tungsten, lead and cadmium
Sample formsSolid, powder and liquid
Test time10 to 60 seconds, 40 seconds for the best reading
Test spot1 to 2 mm diameter
X-ray sourceTriple-stage tungsten (W) target X-ray tube
High voltage0 to 50 kV
Tube current0 to 1000 µA
CameraBuilt-in HD camera for aiming the test spot
ComputerYour own PC or laptop (no screen on the machine)
ConnectivityUSB and Ethernet, printer support
Sample chamber368 × 298 × 86 mm
Dimensions615 × 418 × 315 mm
Net weight40 kg
Operating temperature0°C to 35°C
Operating humidityBelow 70%
Power230 V, 50 Hz
SafetyShielded chamber with an interlock - the X-ray stops when the chamber is opened
Installation and trainingOn site, by our engineer, included

Who Uses It

  • Hallmarking and assaying centres checking gold content and unwanted elements piece by piece
  • Gold refiners confirming the purity of a lot before it leaves
  • Bullion dealers checking bars, biscuits and coins before payment
  • Jewellery manufacturers checking incoming metal against the declared purity
  • Exporters who send a purity report with each consignment
  • Laboratories and quality teams that need the whole element list, not only karat

Booking, Delivery and Returns

TermsDetails
PriceThe full product price and the booking amount are shown at the top of this page, both inclusive of GST
How booking worksThe booking amount reserves your machine and counts toward the full price. The balance is due on installation, as confirmed on your quotation.
OrderingEnquiry only. Not sold through online checkout. Book through our sales team on WhatsApp or by phone.
QuantityOne machine per booking
DeliveryFree
DispatchAbout 45 days from booking
Installation and trainingIncluded, on site
ReturnsNo returns
Manufacturing defectNo standard replacement. If a manufacturing defect is verified on inspection, a replacement may be offered, subject to the product and service terms.
Genuine productYou receive a genuine Signet FSDD, supplied and installed by us

Which Signet XRF Analyzer Fits Your Work

ModelWhat sets it apart
Signet FSDD (this page)Up to 72 elements, ±0.10% on gold, 145 ± 15 eV detector, solid, powder and liquid, runs from your PC
Signet - PC7 metals in one pass, ±0.50% on gold, computer and touch screen built in
Signet Si-Pin165 ± 5 eV detector, reads from trace level, runs from your PC
Portable Gold Testing MachineElectronic karat tester, for testing away from the counter

Common Questions

What is the Signet FSDD?

A benchtop XRF gold analyzer from Semsons Tech. It measures the gold percentage and karat of a sample and lists up to 72 elements in the alloy, without damaging it. It connects to your own PC or laptop.

How accurate is the Signet FSDD?

±0.10% on gold content, across an analysis range of 1% to 99.99%. For the most settled reading, run the test for 40 seconds.

How many elements can it detect?

Up to 72. Alongside gold it reports silver, platinum, palladium, iridium, rhodium, ruthenium, osmium, rhenium, copper, nickel, zinc, cobalt, iron, manganese, tungsten, lead and cadmium, among others, each as a percentage.

Is XRF gold testing safe for jewellery?

Yes. The X-ray does not mark the piece or remove any metal. There is no acid, no scratching and no filing, and the item comes out exactly as it went in.

How long does one test take?

You choose between 10 and 60 seconds. Ten seconds suits a quick check, and 40 seconds gives the best reading when the figure goes on a report.

Can it test powder and liquid samples?

Yes. Solid pieces go straight into the chamber. Powder and liquid go in a sample cup, which covers refinery sweeps, filings and solutions as well as finished jewellery and bars.

Can it test jewellery with stones?

Yes. The HD camera shows the test spot before the test runs, so you aim the beam at the metal beside the stone. The stones do not have to be removed.

Can it detect gold plating or a filled bar?

XRF reads the surface layer of the tested spot, so a plated item or a bar with a different core can read as its outer metal. If the weight, feel or origin of a piece does not match its reading, check it further before you buy.

Does it need a computer?

Yes. The Signet FSDD has no screen of its own and runs from your PC or laptop over USB or Ethernet, with printer support. If you want the computer built in, look at the Signet - PC.

What does it need on site?

A 230 V, 50 Hz power point, a bench that takes 40 kg and a footprint of 615 × 418 × 315 mm, and your PC or laptop beside it. The room should stay between 0°C and 35°C with humidity below 70%.

How is XRF different from an acid or touchstone test?

An acid or touchstone test needs a streak of metal rubbed off the piece and gives an estimate of the karat. XRF leaves the piece untouched and reports the gold percentage to ±0.10% along with every other metal in the alloy, so silver, copper or platinum-group content is listed as well.

How much does the Signet FSDD cost?

The full product price and the booking amount are shown at the top of this page, and both include GST. The booking amount counts toward the full price, and the balance is due on installation.

Can I buy it online?

No. The Signet FSDD is enquiry only and is not sold through online checkout. Message or call our sales team for the quotation, availability and booking. One machine per booking.

Is delivery free, and can I return it?

Delivery is free, and the machine is dispatched about 45 days after booking. It is not returnable. If it has a manufacturing defect, a replacement may be offered once our team has inspected the machine and verified the defect.

Support

Our engineer installs the machine, sets up the software on your computer and trains your operator on site. Service across 16+ Indian cities.

Sales: WhatsApp +91 98216 12340 | Wholesale: WhatsApp +91 80823 38010

Semsons Tech - Where Quality Speaks For Us. Since 1978.

  • Brand
    Semsons Tech

Customer reviews

Be the first to share your experience

Help other jewellers choose the right product.

Sign in to review

Continue exploring

Products you looked at recently.

Interested in this product?

Share your details and our team can help you with this product.

Gold Analyzer XRF Signet FSDD

Outside India? Start with + and your country code.

Your details will be used only to respond to your enquiry about this product. Privacy Policy

Loading...