Semsons Tech

Ultrasonic Jewellery Cleaner with Digital Timer and Temperature Control

40 kHz · Heater 20–80 °C · Digital timer · Degas mode

Price per piece

₹14,499

Inclusive of 18% GST (₹12,287.29 + ₹2,211.71 GST)

Dispatch in about 5–6 days.

A Semsons Tech ultrasonic cleaner for rings, chains, earrings and settings. It cleans in warm water with sound waves, so no brush touches the metal.

  • Warms the water to the temperature you set
  • Stops by itself when the timer runs out
  • Lifts skin oil, dust and polishing compound from under prongs and between links
  • For gold, silver and platinum, and diamonds in secure settings

✔ Heater - warm water loosens oil and compound faster
✔ Temperature control - 20–80 °C, read it on the display
✔ Digital timer - up to 30 minutes, then it stops itself
✔ Lid - keeps the heat and the splashes in
✔ Mesh basket - keeps pieces off the tank floor
✔ Degas mode - drives the air out of fresh water first

Buy now

Questions? Talk to our team.

Product guide

Guide and video

A one-page visual guide and a video of the machine at work.

Watch it in action · 0:36

Product guide

2-litre ultrasonic jewellery cleaner guide: parts of the machine, how to use it and what can go in the tank

Semsons Tech Ultrasonic Jewellery Cleaner with Heater, Digital Timer and Temperature Control

Warm-water ultrasonic cleaning for rings, chains and settings, with a timer that stops the cycle for you.

Jewellery collects skin oil, soap, dust and polishing compound where a cloth cannot reach: under a prong, between chain links, behind a stone, inside engraving. This cleaner lifts it out with sound waves in a tank of water. The heater warms the water to the temperature you set, and the digital timer ends the cycle on its own. You put the pieces in the basket, set the temperature and the time, and close the lid.

How It Works

Transducers under the tank make the water vibrate 40,000 times a second. That is what 40 kHz means. The vibration forms tiny bubbles that collapse against the metal and the stones, and each collapse knocks dirt loose. Warm water helps the cleaning liquid soften oil and polishing compound, so it comes away sooner. The water reaches every gap in the piece, so the cleaning does too, and nothing solid rubs against the surface.

How to Use It

  1. Fill the tank with water, enough to cover the pieces. Add a few drops of mild jewellery-cleaning liquid for oily dirt. Never switch the machine on with the tank empty.
  2. Degas fresh water with the MODE key before the first cycle of the day.
  3. Load the pieces into the mesh basket, spread out so they do not rest on each other, and lower the basket in.
  4. Set the temperature between 20 and 80 °C on the control panel. The display shows it in °C.
  5. Set the timer and start. Up to 30 minutes per cycle. Close the lid. The machine stops when the time runs out.
  6. Rinse and dry each piece in clean water and pat it dry with a soft cloth.
  7. Switch off and drain. Turn off the heater, wait about 10 minutes, unplug the machine, then empty the tank and wipe it dry.

The Control Panel

PartWhat it does
Digital displayShows the temperature in °C and the time
Temperature keySets how warm the water gets, 20–80 °C
Timer keySets how long the cycle runs, up to 30 minutes
MODE keyStarts degas mode for fresh water
Power keySwitches the machine on and off
Indicator lightsMarked POW, TEMP, TIM and MODE

What Can Go in the Tank

Most gold, silver and diamond jewellery cleans well. Some stones and Indian pieces do not, and some do not like warm water either, so check the piece first.

PieceIn the ultrasonic cleaner?
Solid gold, silver and platinum jewelleryYes
Diamonds, rubies and sapphires in a secure settingYes
Loose or worn prongsNot until the setting is repaired. The vibration can shake a loose stone out.
Pearls, coral and amberNo. Wipe with a soft damp cloth.
Emerald, opal, turquoise, tanzanite, lapis and malachiteNo. Clean in lukewarm soapy water with a soft brush.
Stones that are fracture-filled, oiled, dyed or gluedNo. Heat and vibration both work on fillers and glue.
Kundan, polki and meenakariNo. The stones sit in lac and the enamel can be damaged.
Gold-plated and 1-gram goldNo. The vibration wears plating away faster.

Key Specifications

SpecificationDetails
TypeTable-top ultrasonic jewellery cleaner
Capacity2 litres
Ultrasonic frequency40 kHz
HeaterYes, with temperature control
Temperature range20–80 °C
Temperature displayDigital, in °C
TimerDigital, 0–30 minutes, stops the cycle automatically
Degas modeYes, on the MODE key
LidIncluded
BasketMesh basket included
PowerMains lead included
Warranty1 year
DeliveryFree anywhere in India
Dispatch5–6 days from the order

What Comes in the Box

  • The ultrasonic cleaner with its 2 litre tank
  • Lid
  • Mesh basket
  • Mains lead

Who Uses It

  • Jewellery showrooms - a customer's piece cleaned at the counter, or stock before it goes on display
  • Goldsmiths and repair benches - before and after work on a piece, such as a repair on the Laser Welding Machine
  • Jewellery workshops - polishing compound off finished pieces before QC and packing
  • Gold buying and testing counters - a clean surface before a karat reading on the Portable Gold Testing Machine, since dirt on the metal affects the reading

Choosing a Tank Size

A 2 litre tank takes a few rings or one chain per load, which suits a showroom counter or a single bench. Our ultrasonic cleaner size guide shows which tank size fits which kind of shop or workshop. We also sell the ST4820 ultrasonic jewellery cleaner with a 2.3 L tank.

Ordering, Dispatch and Replacement

TermsDetails
PriceShown at the top of this page, per piece, including 18% GST
Capacity2 Litre, selected at the top of this page
Order quantity1 or 2 pieces per order
Dispatch5–6 days from the order
DeliveryFree anywhere in India
Discount codesNot applicable to this product
Warranty1 year
Manufacturing damageReplacement after we verify the damage from your photos and video
Return shippingPaid by you. We confirm the amount on WhatsApp first.

Replacement for Manufacturing Damage

If the machine arrives with genuine manufacturing damage, message us on WhatsApp at +91 98216 12340 and send:

  • clear photos of the damaged machine
  • a short video that shows the problem
  • your order number
  • the invoice from your order
  • a few words on what is wrong

We check the photos and the video against your order before we approve a replacement. Once the damage is verified as a manufacturing fault, we replace the machine. Damage from a fall, misuse, running the tank empty or the wrong cleaning liquid is not manufacturing damage.

If we ask you to send the machine back, message us on WhatsApp before you ship anything. The courier charge for sending it to us is paid by you. It depends on where you send it from, so we confirm the amount and the return address with you first.

Common Questions

What is an ultrasonic jewellery cleaner?

A table-top machine that cleans jewellery in water using sound waves instead of a brush. This one runs at 40 kHz, heats the water and has a digital timer.

Which tank size can I order?

The 2 litre tank. Choose it under Capacity at the top of the page.

Is 40 kHz right for jewellery?

Yes. 40 kHz makes small bubbles that clean fine settings, chain links and engraving without being harsh on finished pieces.

What does the heater do?

It warms the water to the temperature you set on the panel, from 20 to 80 °C. Warm water helps the cleaning liquid soften oil and polishing compound, so pieces come clean sooner than in cold water.

What does the digital timer do?

You set how long the cycle runs, up to 30 minutes, and the machine stops by itself when the time is up. You do not have to stand by and switch it off.

What does degas mode do?

Fresh water holds dissolved air, which weakens the cleaning. Degas mode, on the MODE key, drives that air out before the first cycle.

How is this different from the ST4820 ultrasonic cleaner?

Both run at 40 kHz. This one has a 2 litre tank, a heater you set from 20 to 80 °C, a digital timer up to 30 minutes and degas mode. The ST4820 ultrasonic jewellery cleaner has a 2.3 L tank. Message the sales desk if you are not sure which one suits your counter.

How much jewellery fits in a 2-litre tank?

A few rings or one chain per load, spread out in the basket. For bangles, bridal sets or dozens of pieces at a time, a larger tank suits better.

Is it safe for gold, silver and diamond jewellery?

Yes, for solid gold, silver and platinum and for diamonds, rubies and sapphires in a secure setting. Check the prongs first, because the vibration can shake a loose stone out.

What should never go in an ultrasonic cleaner?

Pearls, coral, amber, opal, emerald, turquoise, tanzanite, lapis and malachite, and any stone that is fracture-filled, oiled, dyed or glued. Keep kundan, polki, meenakari, gold-plated and 1-gram gold pieces out as well. The table above says how to clean each one instead.

What liquid should I use?

Water, with a few drops of mild jewellery-cleaning liquid for oily dirt. Do not use petrol, thinner, alcohol, bleach, acid or nail-polish remover.

Can I switch it on without water?

No. Fill the tank first. Running it empty can damage the machine.

How long should one cycle run?

Start with a short cycle of a few minutes and check the piece. Heavy polishing compound may need a second cycle. Leaving pieces in much longer adds nothing and shakes the settings more.

Does it remove tarnish from silver?

No. It removes dirt, oil and polishing compound. Tarnish is a chemical layer on the silver, so polish it off with a silver cloth first, then clean the piece in the tank.

Does it sterilise tools?

No. An ultrasonic cleaner cleans; it does not sterilise. It is made for jewellery and small workshop pieces.

Is GST included in the price?

Yes. The price shown is per piece and includes 18% GST. The GST amount is listed separately on your invoice.

How many can I order?

One or two pieces per order. For a larger quantity, call the wholesale desk on +91 80823 38010.

Can I use a discount code on this cleaner?

No. Discount codes do not apply to this product. The price shown is the price you pay.

Is delivery free?

Yes. Delivery is free anywhere in India.

How long does dispatch take?

The machine is dispatched 5 to 6 days after the order. Courier transit to your address comes after that.

What warranty does it have?

It comes with a 1-year warranty. For a fault, message us on WhatsApp with your order number, photos and a short video of the problem.

What if the machine arrives damaged?

Message us on WhatsApp with clear photos, a short video of the problem, your order number, the invoice and a few words on what is wrong. We verify the damage before we approve a replacement.

Who pays the courier if the machine has to come back?

You do. The charge depends on where you send it from, so message us on WhatsApp before you ship anything and we confirm the amount and the return address.

Where can I buy an ultrasonic jewellery cleaner in India?

Order it online on this page from Semsons Tech, a jewellery machinery and tools company with its head office at Semsons Plaza, Kandivali West, Mumbai, and service in 16+ Indian cities. Delivery is free anywhere in India. For help choosing a tank size, message the sales desk on WhatsApp +91 98216 12340.

Support

Order it online on this page. For help choosing a tank size or for several machines, message the sales desk.

Sales: WhatsApp +91 98216 12340 · Wholesale: +91 80823 38010

Semsons Tech - Where Quality Speaks For Us. Since 1978.

  • Brand
    Semsons Tech

Customer reviews

Be the first to share your experience

Help other jewellers choose the right product.

Sign in to review

Interested in this product?

Share your details and our team can help you with this product.

Ultrasonic Jewellery Cleaner with Digital Timer and Temperature Control

Outside India? Start with + and your country code.

Your details will be used only to respond to your enquiry about this product. Privacy Policy

Loading...