Buyer’s guide

The best jewellery machine is the one that clears the slowest step in your own work.

No single machine is the best for every business. A showroom needs to test gold and clean pieces at the counter. A small workshop needs to melt, roll, draw and join metal, often on a single-phase supply. A manufacturing unit needs a whole line, from 3D printing and wax injection to stone setting, casting and finishing. Find the stage that holds your work up, then compare machines on the one or two figures that decide that stage: stones an hour for setting, crucible size and supply for melting, roll size for rolling, wire range for drawing.

20,000Stones an hour on the fastest setter
20 kgThe largest melting crucible
0.05 mmThe finest wire drawn
±0.02 mmStone placement accuracy

Which machines does your kind of business need?

Find the row closest to your business. The machines in it are the ones to compare first.

Your businessMachines to look at firstWhat they solve
Showroom or retail counterGold testing machine, ultrasonic cleaner, laser welder for a repair deskChecking old gold before you buy it, cleaning pieces in front of the customer, sizing rings and repairing chains in-house
Small workshop or job-work unitInduction melting machine, rolling mill and wire drawing machine, earring post welder, polishing machinesMelting, making your own sheet and wire, and joining findings without an open flame
Studded jewellery manufacturerAutomatic wax setting machine, with its trays, nozzles, silicone and bases, and wax injectorsSetting stones in wax before casting, which is the largest labour cost in studded work
Casting unit or full factoryA line, stage by stage: 3D printing, wax injection, setting, casting, laser, finishing and testingBalancing every stage so one slow machine does not hold up the rest. Our factory setup plan maps the machines to ten stages
Bullion, coin or old-gold buyerGold coin conductivity tester, XRF gold analyzerFinding fake cores in coins and bars, and reading the full alloy without marking the piece

Buy for the slowest stage first, then for the stage after it.

Which figure decides each machine?

Every machine type has one or two figures that matter more than the rest. Compare those, and ask for them in writing.

JobMachineThe figure that decidesThe models we supply
Setting stones in waxAutomatic wax setting machineStones an hour, and the number of stationsPro Mini up to 10,000 an hour; X4 Pro Plus up to 15,000; ST-⁠HDSSM up to 20,000
Making models3D printerBuild area, and grams of models a dayLCD and DLP resin printers, 50 to 150 g a day; a wax printer, 300 g a day
Making wax copiesVacuum wax injectorHow many moulds you run, and how often you change between themSemi-automatic and digital vacuum injectors, and a robotic injector
Melting metalInduction melting machineCrucible size, and single or three phaseIG-⁠1/2: 1 or 2 kg, single phase, 4 to 6 minutes. IG-⁠3/4: 3 or 4 kg, three phase. IG-⁠10/20: 10 or 20 kg, three phase
CastingVacuum casting machineMetal per cast, and the supplyIVC-⁠1/2: 1 or 2 kg, three phase, 7 kW. A manual vacuum pressure casting machine is in wax injection and casting
Making sheetRolling millRoll width and diameter, and the supplyDouble head rolling machines from 101 × 57 mm rolls on single phase to 152 × 101 mm on three phase
Making wireWire drawing machineNumber of passes, and the thickest wire it takes6, 8 and 12 passes, from up to 2.0 mm down to 0.05 mm
Joining and repairLaser welding machineEnergy in one pulse, the weld spot range, and the microscope200 W pulsed YAG, up to 150 J a pulse, 0.2 to 3.0 mm spot, 10x microscope
Marking and cuttingLaser marking or cutting machineWhat you mark, and whether you also need to cut shapesSmart-⁠Cube, Smart Mark and Smart-⁠2 for marking; Smart Cut for cutting
Cleaning and finishingUltrasonic cleaner, tumblerThe load you clean at one time, and 40 kHz for finished jewelleryST4820, 2.3 L at 40 kHz; the cleaner with heater and digital timer, 2 L at 40 kHz; a tumbler polishing machine
Testing goldGold testing machineWhether you need the karat only, the full alloy, or a check for a fake coreKarat tester, 0 to 24K; Signet XRF analyzers, up to 72 elements; a conductivity tester for coins and bars

Figures are from the 2026 Semsons Tech catalogue and the product pages. Each product page has the full specification.

Will the machine run on your floor?

A machine can only run once the room is ready for it. Check these five things before you order. For a whole line, use the utilities table in our factory setup plan.

  • Power supply. The X4 Pro Plus and Pro Mini, the IG-⁠1/2 melter and the three smaller rolling machines run on single phase. The IG-⁠3/4 and IG-⁠10/20 melters, the IVC-⁠1/2 casting machine and the largest rolling machine need three phase (440 V for the melters and the casting machine). Check your connection first.
  • Compressed air. Wax setting machines need clean, dry air. The Pro Mini and X4 Pro Plus need 80 psi (0.4 MPa), the ST-⁠HDSSM 90 psi (0.6 MPa).
  • Floor and weight. The X4 Pro Plus weighs 850 kg and the largest rolling machine 600 kg. The Pro Mini is 135 kg and fits a smaller room. Check the floor and the door before delivery day.
  • Cooling. The induction melting and casting machines run with a separate water chiller, so leave floor space for it and a way to vent the heat. The laser welder’s chiller is built into its cabinet.
  • Consumables. A setting machine stops when a nozzle wears or the silicone runs out, so keep spares. Ask what each machine uses up, and whether it is in stock.

Choose your machine in four steps

This works for any jewellery machine, whoever you buy it from.

  1. Find the slowest stage. Walk the work from model to finished piece and see where pieces wait. That stage is where a machine pays back first.
  2. Put a number on it. Count what that stage has to handle on a normal day: stones set, kilograms melted, metres of wire, pieces cleaned. Compare machines on that number, not on the brochure’s best figure.
  3. Check your floor. Confirm the supply, air, space and cooling from the list above, so the machine can run the day it arrives.
  4. See it run on your own work. Ask for a demonstration on your own pieces, and get the price, installation, training, warranty and spares in writing. Our guide to buying jewellery machinery in India lists what to check with any supplier.

Where Semsons Tech machines fit

The machine types above that are sold on this site, and how each is bought.

Automatic stone setting

  • ModelsPro Mini, X4 Pro Plus, ST-⁠HDSSM
  • ChoosingSingle vs double station
  • BuyingX4 Pro Plus and Pro Mini: booking amount on the page, machine price on enquiry. ST-⁠HDSSM: on enquiry
  • SetupInstalled and the operator trained by a Semsons technician

Gold testing

  • ModelsSignet XRF analyzers, karat tester, coin conductivity tester
  • ChoosingKarat only, full alloy, or fake cores
  • BuyingFull price and booking amount on each product page

Laser and spot welding

  • Models200 W pulsed YAG laser welder, earring post welder
  • SuitsRepair desks and manufacturing benches
  • BuyingLaser welder: full price and booking amount on its page. Earring post welder: on enquiry

Setting consumables and cleaning

  • ItemsSorting trays, suction nozzles, setting silicone, mounting bases, ultrasonic cleaners (ST4820, and the 2 L cleaner with heater)
  • ChoosingTray and nozzle selector
  • BuyingPriced and ordered online

Laser marking and cutting, wax injection, casting and polishing machines are on this site and quoted on enquiry. 3D printers, induction melting, rolling and wire drawing machines are quoted through the full Semsons Tech machinery catalogue.

Frequently asked questions

Which is the best jewellery machine in India?

There is no single best machine. The best one for you is the machine that clears the slowest stage of your own work. For studded jewellery that is usually stone setting, where one automatic wax setting machine, run by one operator, does the work of a bench of hand setters: 10 to 12 for the X4 Pro Plus. A showroom gains more from a gold testing machine and an ultrasonic cleaner. A small workshop gains more from a melting machine and a rolling mill.

Which jewellery machines does a small workshop need first?

It depends on the work, but job work usually starts with melting, rolling, joining and polishing. A 1 or 2 kg induction melter that runs on single phase, a rolling mill sized to the sheet and wire you make, and a polishing setup cover most job work. Add a laser welder when repairs and fine joints start taking bench time.

Can jewellery machines run on a single-phase supply?

Many can. The X4 Pro Plus and Pro Mini wax setting machines, the IG-1/2 induction melter and the three smaller double head rolling machines run on single phase. The larger IG-3/4 and IG-10/20 melters, and the IVC-1/2 vacuum casting machine need a three-phase, 440 V supply, and the largest rolling machine needs three phase too.

Which jewellery machine saves the most labour?

In studded jewellery, the automatic wax setting machine. The X4 Pro Plus does the work of 10 to 12 skilled manual setters and the Pro Mini about 10, each run by one operator, placing every stone to ±0.02 mm.

How are jewellery machines priced on this site?

Setting consumables and the ST4820 ultrasonic cleaner are priced and ordered online. The gold testing machines and the laser welder show their full price and a booking amount on the product page. The X4 Pro Plus and Pro Mini show a booking amount, with the machine price on enquiry. Bookings are taken by our sales team on WhatsApp or phone. Other machines are quoted on enquiry, because the price depends on the model, the delivery and the installation.

Do you install the machine and train the operator?

Yes. A Semsons technician installs each machine on site and trains the operator. The ST4820 ultrasonic cleaner is the exception: it is couriered and plugs straight in. The installation, training and spares page has the details.

Read next: automatic vs manual stone setting, sizing an induction melting machine, choosing a jewellery 3D printer, and the glossary for the terms used here.

Loading...